-
RF/Microwave
ASC proudly offers advanced RF microwave PCBs that use high frequency and heat sink technologies. We have extensive experience and technical expertise in the manufacturing of time critical, high technology RF circuits. We work closely with our worldwide customers to deliver prototype-to-high volume manufacturing of RF microwave PCBs.
Some of the suppliers of laminate / dielectric materials we utilize are: Nelco, Rogers, Isola, & Taconic. We manufacture high frequency PCBs with metal heat sinks for the telecommunication and aerospace industries. The heat sinks and RF Microwave PCBs are typically connected thermally and electrically. The metal heat sinks help with thermal dissipation and grounding of circuits. ASC uses commercially available pre-bonded and post-bonded materials for our RF microwave PCBs. Pre-bonded laminates are typically supplied by Rogers, Isola, or Taconic. Post-bonding is done via commercially available sheet film adhesive materials, ASC’s patented sheet film adhesives or sweat solder.
$3,000.00 -
Rigid Flex
Rigid flex circuits combine the benefits of rigid boards and flexible circuits integrated into one circuit. The two-in-one circuit is interconnected through plated through holes. Rigid flex circuits provide higher component density and better quality control. The slideshow below shows an eight layer rigid flex circuit used for a medical device. Four layers are rigid and four layers are flexible. There are connectors required on two different sides of the circuit, which is carrying signals and power.
$1,180.00 -
$3,000.00 -
$3,000.00 -
Round Cable Assemblies
Our Flat Cable Assemblies are engineered for high-density interconnections, reliable signal transmission, and space-efficient routing in electronic and industrial applications. Manufactured with precision and premium materials, they deliver dependable performance in demanding environments.
$1,180.00 -
SCIM 1001
The SCIM1001 (Signal Conditioning Interface Module) is used to match the input and output characteristics of the AN/ARC-210 Integrated Communication System with digital subsystems in both air vehicle and ground support equipment. The Signal Conditioner inputs RS-422 UCARS-V2 asynchronous data and conditions it to meet the ARC-210 Black Wideband Transmit data requirement. The SCIM provides an interface for five DCP TX/RX pairs. Four of these signal pairs are routed to interface modules inside the SCIM for conversion to the appropriate levels for the ARC-210 while the fifth interface pair is routed directly to a UCARS interface connector. The module is powered with 28 Volts DC and it also creates the WB data input select and retransmit key signals. These discrete signals are active low enabling and are required by the RT-1794 ARC-210 for the Black Wideband Data Transmission per the IDS-988-6499-001 RT-1794 Interface Design Specification.
$1,180.00 -
$3,000.00 -
SDK qb
SDK qb, our tailor-made Software Development Kit (SDK). Our main goal was to design a comprehensive pack to support our clients’ NPU application and development experience to be intuitive, quick, and accessible.
$3,000.00 -
Sealed Limit Switches
Precision made using stainless steel construction insures long life and high performance over extremely harsh environments. These switches are typically used to detect travel of mechanisms found on Aircraft Landing Gear, Weapon Systems, Wings, Doors, Flaps, Thrust Reverses, and Rockets. All switches are conventionally machined, hand tested and calibrated using state of art techniques.
$1,180.00 -
Sheet Metal Fabrication
Our sheet metal shop specializes in electronic enclosures, offering precision fabrication in steel, aluminum, and stainless steel. Equipped with advanced Mitsubishi and Trumpf lasers, punch presses, and brake presses, we deliver high-quality parts with a preferred maximum cabinet size of 72″ x 36″ x 18″—ideal for both prototyping and production.
$1,180.00 -
SIGMA Poly Enclosures
SIGMA Poly Enclosures (SPE) Product Division offers an extensive range of enclosures, extensions, and lids
$3,000.00 -
SIM Card Socket
115U-B210
Micro SD and Nano SIM Socket, Stack Type, Tray Push-Pull, w/Lock and Switch, 10u”, C7025, Reel
ATTEND’s 115U Push-Pull SIM Socket Series integrates a secure Push-Pull mechanism with an innovative tray design, ensuring reliable SIM retention, smooth ejection, and resistance to vibration and shock. Tested to EN 60721-3-5 Class 5M3 standards, it is optimized for automotive, industrial, and IoT applications, offering reverse insertion protection, precise card alignment, and long-term durability.
For enhanced environmental resilience, the series provides IP67 waterproof protection when used with designated trays and operates within a temperature range of -40°C to +105°C. The 115U-B210 model features a 2-in-1 stacked design for SIM and Micro SD, maximizing PCB space efficiency and design flexibility.
$3,000.00